Skip to content

Product series — 92 000

Everest 92 000 Series Lift & Slide Doors

A lift-and-slide aluminum door family documented with its frame, sash and central-sash sections, closing and reinforcement profiles, glazing beads, guides, drainage components and lift-and-slide hardware.

PDF · 11.8 MB

92 000 Series technical catalog

Everest 92 000 Series Lift & Slide Doors — Technical Catalog

Official Everest manufacturer document supplied by Gloria Glass. Catalog values apply to the configurations documented inside the catalog. They are not universal performance values for every project, and they are not US, Colorado, New York or California code approval.

Everest 92 000 Series lift-and-slide door technical cutaway: silver aluminum sill, frame and sash sections with yellow gaskets and orange thermal components, guides and insulated glazing, shown on a plain white background.

Best suited for

  • Large sliding openings where the panel lifts off its seals to move and drops back down to seal
  • Living-space openings to a terrace, deck or garden with wide panel widths
  • Projects where the sliding opening is scheduled alongside other aluminum families
  • Fabricators working from documented construction sections and hardware detail
  • Design teams comparing lift-and-slide against a straightforward horizontal slider

Configurations

  • Lift-and-slide panels operating on documented guides and drainage components
  • Frame, sash and central-sash sections documented in the catalog
  • Closing and reinforcement profiles per the section list
  • Glazing beads, glass holders and spacers documented per section
  • Construction sections for sill, head, jamb and interlock conditions
  • Lift-and-slide hardware documented in its own catalog chapter

System overview

The 92 000 Series is Everest's lift-and-slide aluminum door family. The supplied catalog documents the frames, the sash and central-sash sections, the closing and reinforcement profiles, the glazing beads, the guides and drainage components, the glass holders and spacers, the construction sections and the lift-and-slide hardware.

Lift-and-slide differs from a straightforward horizontal slider in how it seals. The handle lifts the panel off its seals to move it and sets it back down to compress them when closed, which is why the hardware and the sill detail are documented as their own chapters.

This page covers the 92 000 Series only. Values, configurations and hardware belonging to the 91 000 or other sliding families are not mixed in here — those are separate systems with separate documentation.

No performance, security, rating, certification, warranty or glazing-thickness claim is published on this page beyond what the supplied catalog documents. A figure for a specific opening comes from current Everest submittals for that exact configuration.

Technical snapshot from the manufacturer catalog

Figures below are manufacturer catalog data supplied by Everest. CE and EN references are European manufacturer documentation, not US, Colorado, New York or California code approval.

System type
Lift-and-slide aluminum door family
Documented sections
Frames, sash and central-sash sections, closing and reinforcement profiles, glazing beads
Documented components
Guides, drainage components, glass holders and spacers
Hardware
Lift-and-slide hardware documented in the supplied catalog
Performance values
Not stated in the supplied catalog

Confirmed per configuration on current Everest submittals

Final glass make-up, profile selection, anchors, spans, panel and sash sizes, hardware, drainage and any thermal, acoustic or structural value require current Everest submittals plus project-specific architect, engineer and code review. Nothing on this page is a code approval, a performance guarantee or a project-specific recommendation.

Components and details

  • Frame sections with documented guides and drainage
  • Sash and central-sash sections
  • Closing and reinforcement profiles
  • Glazing beads, glass holders and spacers
  • Lift-and-slide hardware set

Glass, infill and hardware considerations

  • Glazing make-up is set with the design team and the glass fabricator and confirmed on current submittals; no glazing thickness is claimed here.
  • Glazing beads, glass holders and spacers are selected to suit the glass actually specified, per the catalog sections.
  • Lift-and-slide hardware is selected against panel size, weight and daily use, and confirmed on current submittals.
  • Threshold, drainage and sill detailing is resolved against the adjacent floor build-up and the exposure of the opening.
  • Finish selection is confirmed with current Everest finish documentation for the specified profiles.

Specification workflow

  1. Send the opening width and height, panel count and which panels are intended to move.
  2. State the threshold intent and the floor build-up on both sides of the opening.
  3. Confirm the glazing intent with the design team and the glass fabricator.
  4. Request current Everest submittals for the specified configuration and route them for architect, engineer and code review.
  5. Confirm hardware, drainage and fabrication details before ordering.

Request a technical review

Send plans, elevations, a schedule or a take-off by email and we will review the 92 000 Series against what the drawings actually show, then tell you what else is needed before it can be priced or specified. Email info@gloria-glass.com or start from the contact form — there is no document upload on this page.

Request 92 000 Series Quote

92 000 Series questions

What does lift-and-slide mean?
The handle lifts the panel off its seals so it can move, then sets it back down so the seals compress when the door is closed. The supplied 92 000 catalog documents the sections and hardware for that operation.
What does the supplied catalog actually contain?
Frames, sash and central-sash sections, closing and reinforcement profiles, glazing beads, guides and drainage components, glass holders and spacers, construction sections and the lift-and-slide hardware chapter.
What glass thickness does the 92 000 Series take?
No thickness is claimed on this page. The glazing make-up for a project is set with the design team and confirmed against current Everest documentation for the specified configuration.
How is this different from the 91 000 Series?
They are separate documented families. The 91 000 catalog covers straightforward horizontal sliders; the 92 000 catalog covers lift-and-slide operation, with its own sections and hardware. Nothing is carried across between the two pages.
Can you publish a performance, security or code-approval rating for this door?
No. The supplied catalog is a fabrication and detailing document. Any such figure comes from current Everest submittals for the exact configuration and is reviewed by the project team and the authority having jurisdiction.

Project regions

Gloria Glass works on projects in Colorado, New York and California, with Denver, New York City and Los Angeles as its principal target markets. Its verified principal office is in Littleton, Colorado; there is no office, showroom, warehouse or inventory in New York or California.

Gloria Glass accepts sales and specification inquiries for these series on projects in Colorado, New York and California, from its principal office in Littleton, Colorado. There is no claimed office, showroom, warehouse or inventory in New York or California. Gloria Glass does not claim authorised or exclusive distribution, does not fabricate these systems, does not stock them, does not guarantee their performance and does not claim completed projects using them.

92 000 Series inquiry

Request an Everest 92 000 Series quote

Send drawings, a schedule or a take-off and we will tell you what else is needed to specify and price the system properly.

info@gloria-glass.com

Availability, final specifications, certification, engineering requirements, glazing, finish, delivery and project suitability are confirmed for each project.