Product series — 62 000
Everest 62 000 Series Bi-Fold System
A bi-fold, sliding-folding window and door panel family, documented in the manufacturer catalog supplied to Gloria Glass with its profile sections, tracks, wings, glazing beads, gaskets, accessories and fabrication details.
PDF · 5.2 MB
62 000 Series technical catalog
Everest 62 000 Series Bi-Fold System — Technical Catalog
Official Everest manufacturer document supplied by Gloria Glass. Catalog values apply to the configurations documented inside the catalog. They are not universal performance values for every project, and they are not US, Colorado, New York or California code approval.
Best suited for
- Openings where the design intent is for the panels to fold and stack rather than slide past one another
- Living, hospitality or retail spaces that open a wide span to a terrace, patio or street frontage
- Projects comparing a folding concept against a sliding or lift-and-slide family
- Fabricators working from documented profile sections, cut lists and accessory schedules
- Teams that need the manufacturer catalog and standard details as source documents
Configurations
- Bi-fold, sliding-folding window and door panel arrangements within the documented family
- Profile sections, tracks and wings documented in the supplied catalog
- Glazing beads and gasket selection per the documented sections
- Accessory and hardware schedule as set out in the catalog
- Fabrication and cut-list details for the documented configurations
- Panel counts and stacking direction confirmed on current submittals for the specific opening
System overview
The 62 000 Series is Everest's bi-fold system: a sliding-folding window and door panel family in which the leaves are hinged to each other and travel on a track so the opening stacks clear rather than sliding one panel behind another.
The supplied catalog is a fabrication and detailing document. It sets out the profile sections, tracks, wings, glazing beads, accessories and gaskets, together with configurations, fabrication guidance and cut-list details for the documented arrangements.
The catalog general notes identify a four-wheel Teflon roller with a stated maximum capacity of 250 kg in total and 125 kg per wing, and describe EPDM gaskets with high-density brush sealing. Those are manufacturer catalog figures for the documented configurations.
Nothing here is a thermal, structural, air, water, wind, acoustic or energy value, a certification, a warranty or a US, Colorado, New York or California code approval. Figures for a specific opening come from current Everest submittals for that exact configuration and are reviewed by the project team and the authority having jurisdiction.
Technical snapshot from the manufacturer catalog
Figures below are manufacturer catalog data supplied by Everest. CE and EN references are European manufacturer documentation, not US, Colorado, New York or California code approval.
- System type
- Bi-fold / sliding-folding window and door panel system
- Roller
- Four-wheel Teflon roller
- Stated roller capacity
- 250 kg total / 125 kg per wing
- Gaskets
- EPDM
- Sealing
- High-density brush
- Documented content
- Sections, tracks, wings, glazing beads, accessories, configurations, fabrication and cut lists
Catalog general notes for the documented configurations
Manufacturer catalog maximum, not a project performance value
Final glass make-up, profile selection, anchors, spans, panel and sash sizes, hardware, drainage and any thermal, acoustic or structural value require current Everest submittals plus project-specific architect, engineer and code review. Nothing on this page is a code approval, a performance guarantee or a project-specific recommendation.
Components and details
- Frame, sash and wing profile sections documented in the catalog
- Track sections for the folding panel run
- Four-wheel Teflon roller identified in the catalog general notes
- Glazing beads for the documented glazing arrangements
- EPDM gaskets and high-density brush sealing per the catalog notes
- Accessories and fabrication / cut-list details for the documented configurations
Glass, infill and hardware considerations
- No glazing thickness is claimed on this page. The make-up for a project is set with the design team and the glass fabricator and confirmed against current Everest documentation for the specified configuration.
- Panel weight is checked against the catalog roller figures — 250 kg in total and 125 kg per wing — before wing dimensions are fixed.
- Track, threshold and floor build-up are coordinated with drainage and waterproofing on both sides of the opening.
- Gasket and brush selection follows the documented sections rather than being substituted on site.
- Finish selection is confirmed with current Everest finish documentation for the specified profiles.
Specification workflow
- Send the opening width and height, the intended number of wings and the stacking direction.
- State the floor build-up and threshold intent so the track detail can be coordinated.
- Confirm the intended glazing make-up so wing weight can be checked against the catalog roller figures.
- Check total and per-wing weight against the documented 250 kg / 125 kg catalog maximums.
- Request current Everest submittals for the specified configuration and route them for architect, engineer and code review.
Request a technical review
Send plans, elevations, a schedule or a take-off by email and we will review the 62 000 Series against what the drawings actually show, then tell you what else is needed before it can be priced or specified. Email info@gloria-glass.com or start from the contact form — there is no document upload on this page.
Request 62 000 Series Quote62 000 Series questions
- What does the 62 000 catalog cover?
- The supplied catalog documents the bi-fold family: profile sections, tracks, wings, glazing beads, accessories and gaskets, together with configurations, fabrication guidance and cut-list details. Nothing beyond that document is published on this page.
- How much weight do the rollers carry?
- The catalog general notes identify a four-wheel Teflon roller with a stated maximum capacity of 250 kg in total and 125 kg per wing. That is a manufacturer catalog figure for the documented configurations, not a project performance value.
- What sealing does the catalog document?
- The catalog notes identify EPDM gaskets and high-density brush sealing. No air, water or acoustic rating is published here.
- How is a bi-fold different from a sliding or lift-and-slide family?
- The leaves are hinged to each other and fold back to stack clear of the opening, rather than sliding past one another. The 91 000, 92 000, 93 000 and 94 000 families are documented separately and no data is carried across between pages.
- What glass thickness does the 62 000 Series take?
- No thickness is claimed on this page. The glazing make-up for a project is set with the design team and confirmed against current Everest documentation for the specified configuration.
- Can you publish a performance or code-approval rating for this system?
- No. The supplied catalog is a fabrication and detailing document. Any such figure comes from current Everest submittals for the exact configuration and is reviewed by the project team and the authority having jurisdiction.
Related systems and reading
Aluminum door systems overview
How aluminum door openings are scoped, scheduled and coordinated on a project.
ContinueEverest 91 000 Series Sliding Doors & Windows
The straightforward horizontal slider family, documented separately.
ContinueAll Everest product series
The twelve documented series side by side, with the catalog scope of each and where they overlap.
ContinueProject regions
Gloria Glass works on projects in Colorado, New York and California, with Denver, New York City and Los Angeles as its principal target markets. Its verified principal office is in Littleton, Colorado; there is no office, showroom, warehouse or inventory in New York or California.
Denver & Colorado
Front Range projects: altitude and solar exposure, diurnal temperature swing, wind and snow detailing at sills and thresholds.
Region pageNew York City
Dense urban work: building access and hoisting, freight and lobby restrictions, occupied-building sequencing and unit-size limits.
Region pageLos Angeles
Indoor–outdoor architecture: wide sliding openings, flush thresholds, coastal exposure and finish durability.
Region pageGloria Glass accepts sales and specification inquiries for these series on projects in Colorado, New York and California, from its principal office in Littleton, Colorado. There is no claimed office, showroom, warehouse or inventory in New York or California. Gloria Glass does not claim authorised or exclusive distribution, does not fabricate these systems, does not stock them, does not guarantee their performance and does not claim completed projects using them.
62 000 Series inquiry
Request an Everest 62 000 Series quote
Send drawings, a schedule or a take-off and we will tell you what else is needed to specify and price the system properly.
info@gloria-glass.comAvailability, final specifications, certification, engineering requirements, glazing, finish, delivery and project suitability are confirmed for each project.