Product series — 71 000
Everest 71 000 Series Large Thermal Barrier Aluminum Windows
An aluminum window and door family built around a large thermal barrier, documented with its section list, scale 1:1 profiles, accessory and weatherstrip chapters and infill from 11 to 46 mm — glass or panel.
PDF · 56.9 MB
71 000 Series technical catalog
Everest 71 000 Series Large Thermal Barrier Aluminum Windows — Technical Catalog
Official Everest manufacturer document supplied by Gloria Glass. Catalog values apply to the configurations documented inside the catalog. They are not universal performance values for every project, and they are not US, Colorado, New York or California code approval.
Best suited for
- Punched window openings where a wider thermal barrier is wanted in the section
- Window and door openings detailed from the same documented section family
- Projects that combine glazed lites and infill panels within the documented thickness range
- Fabricators working from a documented cut list, accessory list and tooling sequence
- Elevations scheduled alongside other Everest aluminum families
Configurations
- Window and door sections documented at scale 1:1 within one section family
- Large thermal barrier construction through the frame and sash sections
- Glass infill from 11 to 46 mm with the matching glass beading
- Panel infill within the same documented thickness range
- Accessory and weatherstrip selection documented per section
- Cut-list formulas and tooling sequence for shop fabrication
System overview
The 71 000 Series is Everest's aluminum window and door family built around a large thermal barrier. The supplied catalog is a fabrication and detailing document: general notes, the list of sections, scale 1:1 sections, weatherstrip, glass and beading insertion, the accessory and weatherstrip list, the window and door sections, the cut list and the tooling chapter.
Infill is the first project decision. The catalog documents glass or panels from 11 to 46 mm within the same family, with the beading selected to suit the thickness actually specified.
Sections are identified in the catalog as EN-AW 6060 aluminium under the referenced European standards. Those are the manufacturer's own material and tolerance references — they are not a performance rating and not US, state or local approval.
No U-value, air, water, acoustic or security figure is published on this page. The supplied catalog states none; a value for a specific opening comes from current Everest submittals for that exact configuration and is reviewed by the project team.
Technical snapshot from the manufacturer catalog
Figures below are manufacturer catalog data supplied by Everest. CE and EN references are European manufacturer documentation, not US, Colorado, New York or California code approval.
- System type
- Aluminum window and door family with a large thermal barrier
- Infill thickness documented
- 11 to 46 mm
- Alloy reference
- EN-AW 6060
- Catalog scope
- General notes, list of sections, scale 1:1 sections, insertion chapters, accessories, window and door sections, cut list and tooling
- Performance values
- Not stated in the supplied catalog
Glass or panels, per the supplied 71 000 catalog
European manufacturer catalog reference, not US code approval
Confirmed per configuration on current Everest submittals
Final glass make-up, profile selection, anchors, spans, panel and sash sizes, hardware, drainage and any thermal, acoustic or structural value require current Everest submittals plus project-specific architect, engineer and code review. Nothing on this page is a code approval, a performance guarantee or a project-specific recommendation.
Components and details
- Frame and sash sections documented at scale 1:1
- Large thermal barrier inserts within the frame and sash
- Weatherstrips and gaskets per the insertion chapter
- Glass beading matched to the specified infill thickness
- Accessories and fixings documented in the accessory chapter
Glass, infill and hardware considerations
- Infill selection — glass or panel — is made within the documented 11 to 46 mm range and confirmed with the glass fabricator.
- Glass beading and weatherstrip selection follows the infill thickness actually specified, per the catalog insertion chapter.
- Window and door hardware is selected against sash size, weight, operation and the applicable code, and confirmed on current submittals.
- Finish selection is confirmed with current Everest finish documentation for the specified profiles.
Specification workflow
- Send the opening sizes, operation and handing for each unit in the schedule.
- State the intended infill and thickness within the documented 11 to 46 mm range.
- Confirm how the units meet the adjacent construction: masonry, framing or storefront.
- Request current Everest submittals for the specified configuration and route them for architect, engineer and code review.
- Confirm accessories, weatherstrips and fabrication details before ordering.
Request a technical review
Send plans, elevations, a schedule or a take-off by email and we will review the 71 000 Series against what the drawings actually show, then tell you what else is needed before it can be priced or specified. Email info@gloria-glass.com or start from the contact form — there is no document upload on this page.
Request 71 000 Series Quote71 000 Series questions
- What infill thickness does the 71 000 Series take?
- The supplied catalog documents glass or panels from 11 to 46 mm. The exact make-up for a project is set by the design team and confirmed on current submittals, with the beading selected to suit.
- What does the supplied catalog actually contain?
- General notes, the list of sections, scale 1:1 sections, weatherstrip, glass and beading insertion, the accessory and weatherstrip list, the window and door sections, the cut list and the tooling chapter.
- Can you publish a U-value for this window family?
- No. The supplied catalog is a fabrication and detailing document and states no such value. A thermal, air, water or acoustic figure for a specific opening comes from current Everest submittals for that exact configuration.
- How does 71 000 differ from 70 000?
- They are separate documented families with separate catalogs. This page carries only what the 71 000 catalog documents; nothing from the 70 000 catalog is applied to it.
- Do the EN references mean the system is approved in Colorado, New York or California?
- No. They are European manufacturer material and tolerance references from the catalog. US, state and local approval is a separate process handled by the design team and the authority having jurisdiction.
Related systems and reading
Aluminum window systems overview
How aluminum window openings are selected, scheduled and coordinated.
ContinueEverest 70 000 Series Aluminum Windows
The other documented punched-window family, with its own catalog scope.
ContinueThermally broken aluminum systems
What a thermal barrier does in an aluminum section and how it is specified.
ContinueAll Everest product series
The ten documented series side by side, with the catalog scope of each and where they overlap.
ContinueProject regions
Gloria Glass works on projects in Colorado, New York and California, with Denver, New York City and Los Angeles as its principal target markets. Its verified principal office is in Littleton, Colorado; there is no office, showroom, warehouse or inventory in New York or California.
Denver & Colorado
Front Range projects: altitude and solar exposure, diurnal temperature swing, wind and snow detailing at sills and thresholds.
Region pageNew York City
Dense urban work: building access and hoisting, freight and lobby restrictions, occupied-building sequencing and unit-size limits.
Region pageLos Angeles
Indoor–outdoor architecture: wide sliding openings, flush thresholds, coastal exposure and finish durability.
Region pageGloria Glass accepts sales and specification inquiries for these series on projects in Colorado, New York and California, from its principal office in Littleton, Colorado. There is no claimed office, showroom, warehouse or inventory in New York or California. Gloria Glass does not claim authorised or exclusive distribution, does not fabricate these systems, does not stock them, does not guarantee their performance and does not claim completed projects using them.
71 000 Series inquiry
Request an Everest 71 000 Series quote
Send drawings, a schedule or a take-off and we will tell you what else is needed to specify and price the system properly.
info@gloria-glass.comAvailability, final specifications, certification, engineering requirements, glazing, finish, delivery and project suitability are confirmed for each project.