Product series — 38 000 / 39 000
Everest 38 000 / 39 000 Series Storefronts
Two paired commercial storefront framing families documented together: fixed glazing, entrances and doors, mullion and transom construction and multi-lite configurations for ground-floor commercial frontages.
PDF · 13.6 MB
38 000 / 39 000 Series technical catalog
Everest 38 000 / 39 000 Series Storefronts — Technical Catalog
Official Everest manufacturer document supplied by Gloria Glass. Catalog values apply to the configurations documented inside the catalog. They are not universal performance values for every project, and they are not US, Colorado, New York or California code approval.
38 000 / 39 000
Storefronts
Ground-floor commercial frontages, entrances and multi-lite framing.
Best suited for
- Retail, restaurant and hospitality frontages at ground level
- Office lobbies and entrance bays combining fixed lites with swing doors
- Multi-lite elevations divided by mullions and transoms
- Tenant fit-outs replacing or extending an existing storefront line
- Projects that need entrance hardware planned alongside the framing rather than after it
Configurations
- Fixed glazed lites within a framed storefront grid
- Entrance and door openings integrated into the framing
- Mullion and transom divisions across the elevation
- Multi-lite configurations combining fixed glazing and operable entrances
- Head, jamb and sill interface details against adjacent construction
System overview
The 38 000 and 39 000 Series are presented as paired commercial storefront framing families. The supplied catalogs cover fixed glazing, entrance and door integration, mullion and transom construction and the multi-lite configurations that a storefront elevation is normally divided into.
Storefront framing sits at ground level and is loaded differently from curtain wall: it is a floor-to-head framed system rather than a multi-storey envelope, and its critical details are the entrance interface, the sill and threshold, and the head condition against the structure above.
The catalog general notes give the aluminum alloy as EN-AW 6060 under EN 573-3, with heat-treatment dimensional references under EN 755-2. These are European manufacturer material and dimensional standards recorded in the catalog, not a statement about US code compliance.
The 39 000 notes state glass and panels at 25 mm. That figure belongs to 39 000 as documented and is not carried across to 38 000 automatically — where a project needs the equivalent figure for 38 000, it is confirmed from current submittals for the specific configuration.
Technical snapshot from the manufacturer catalog
Figures below are manufacturer catalog data supplied by Everest. CE and EN references are European manufacturer documentation, not US, Colorado, New York or California code approval.
- System type
- Commercial storefront framing — two paired families
- Aluminum alloy
- EN-AW 6060 under EN 573-3
- Heat-treatment dimensional reference
- EN 755-2
- Glass and panels — 39 000
- 25 mm
- Documented scope
- Fixed glazing, entrances and doors, mullion / transom, multi-lite configurations
Catalog general notes; European material standard reference
Catalog general notes; European dimensional standard reference
Stated in the 39 000 notes; not automatically applicable to 38 000
Final glass make-up, profile selection, anchors, spans, panel and sash sizes, hardware, drainage and any thermal, acoustic or structural value require current Everest submittals plus project-specific architect, engineer and code review. Nothing on this page is a code approval, a performance guarantee or a project-specific recommendation.
Components and details
- Storefront frame, mullion and transom profiles for both families
- Door and entrance framing components integrated into the storefront line
- Glazing beads, gaskets and glazing accessories appropriate to the configuration
- Sill, threshold and head interface components
- Entrance hardware provisions planned with the framing, not added afterwards
Glass, infill and hardware considerations
- Glazing selection, frame dimensions, anchorage, drainage and exposure are project-specific and are settled on the project drawings and current submittals.
- The 25 mm figure recorded in the 39 000 notes is family-specific documentation, not a universal storefront glass thickness.
- Entrance hardware — closers, pivots or hinges, locking, panic hardware and accessibility requirements — is specified with the door and the framing together.
- Threshold detailing has to satisfy both water management and accessible-route requirements, which are resolved by the design team for the jurisdiction.
- Finish selection is confirmed with current Everest finish documentation for the specified profiles.
Specification workflow
- Send the storefront elevation with overall dimensions, lite divisions and door locations.
- Identify which family the design is being developed around, or ask for both to be compared.
- State the door type, swing, hardware expectations and any accessibility requirements.
- Confirm the head, jamb and sill conditions and what the framing anchors into.
- Request current Everest submittals for the specified configuration and route them to the architect and engineer.
- Confirm glazing, anchorage, drainage and exposure detailing before anything is ordered.
Request a technical review
Send plans, elevations, a schedule or a take-off by email and we will review the 38 000 / 39 000 Series against what the drawings actually show, then tell you what else is needed before it can be priced or specified. Email info@gloria-glass.com or start from the contact form — there is no document upload on this page.
Request 38 000 / 39 000 Series QuoteProject regions
Gloria Glass works on projects in Colorado, New York and California, with Denver, New York City and Los Angeles as its principal target markets. Its verified principal office is in Littleton, Colorado; there is no office, showroom, warehouse or inventory in New York or California.
Denver & Colorado
Front Range projects: altitude and solar exposure, diurnal temperature swing, wind and snow detailing at sills and thresholds.
Region pageNew York City
Dense urban work: building access and hoisting, freight and lobby restrictions, occupied-building sequencing and unit-size limits.
Region pageLos Angeles
Indoor–outdoor architecture: wide sliding openings, flush thresholds, coastal exposure and finish durability.
Region pageGloria Glass accepts sales and specification inquiries for these series on projects in Colorado, New York and California, from its principal office in Littleton, Colorado. There is no claimed office, showroom, warehouse or inventory in New York or California. Gloria Glass does not claim authorised or exclusive distribution, does not fabricate these systems, does not stock them, does not guarantee their performance and does not claim completed projects using them.
38 000 / 39 000 Series questions
- Why are 38 000 and 39 000 documented together?
- They are paired commercial storefront framing families covering the same broad application. The pages keep them together so the configurations can be compared, while family-specific catalog values stay attached to the family they came from.
- Does the 25 mm glass figure apply to both families?
- No. The 25 mm glass and panel figure is stated in the 39 000 notes. It is not carried across to 38 000 here; the equivalent figure for 38 000 is confirmed from current submittals for the specific configuration.
- What does the EN-AW 6060 reference tell us?
- It is the aluminum alloy recorded in the catalog general notes, referenced under EN 573-3, with heat-treatment dimensional references under EN 755-2. These are European manufacturer material and dimensional standards, not US code approval.
- Can entrances be integrated into the same framing line?
- Yes — the catalogs document entrance and door integration alongside fixed glazing, mullion and transom construction and multi-lite configurations. Hardware is planned with the framing rather than selected afterwards.
- Is this a repair or replacement service?
- No. This page covers manufacturer storefront framing systems and their specification. Repair and replacement of existing glass is covered by the separate Gloria Glass service pages.
Related systems and reading
Storefront systems overview
The general storefront page: how commercial frontage framing is scoped, specified and coordinated.
ContinueStorefront glass services
The Gloria Glass service page for storefront glass work, including measurement and installation scope.
ContinueStorefront measurement checklist
The field information an estimator needs before a storefront quote can be meaningful.
ContinueAll Everest product series
The five documented series side by side, with the catalog scope of each and where they overlap.
Continue38 000 / 39 000 Series inquiry
Request an Everest 38 000 / 39 000 Series quote
Send drawings, a schedule or a take-off and we will tell you what else is needed to specify and price the system properly.
info@gloria-glass.comAvailability, final specifications, certification, engineering requirements, glazing, finish, delivery and project suitability are confirmed for each project.